All Products

Stabilizer set includes one size 6.25U (WK) or 7U (WKL) and four 2U pieces.

Introducing NEW TX Stabilizers!

Implementing a patented technology, kin25 of TX Keyboard has improved the design of Cherry clip-ins to minimize rattling and prevent wire pop-out (using stab stoppers included with the set). The patented design features a double shot stabilizer stem with a POM outside and TPU & POM mixture inside. This mixture helps to minimize wire rattle and bottom out noise.

• WK Kit: Includes one 6.25U + four 2U stabilizers
• WKL Kit: Includes one 7U + four 2U stabilizers
  
• Black or White coloured housing
• 1 pack of stab stoppers (12 shims total)
  

* We recommend that you lubricate the stabilizers with a thin coat of Krytox 205g0 or Krytox XHT-BDZ prior to use.

Revisions

Rev. 2: Shims/Inserts were updated to fit more PCBs
Rev. 3: Addition of White coloured stabilizers + 1.2T PCB variant

Please note: this item is final sale. No returns or refunds will be accepted.

Krytox GPL 205 Grade 0, also referred to as 205g0, is a industrial-grade grease, thickened with PTFE. It is used to lube keyboard switches, giving them a very smooth feel when typing.

We highly recommend using this lube on linear switches and stabilizers. Due to it's high viscosity, we do not recommend using this on switch springs or tactile-switches. 

5mL is enough to apply to approximately 450-500 switches. 

Our jars are child-proof and require you to press down on the lid, and twist to open.

Two disposable applicator brushes will be included with each order, but we recommend using a Premium Lubricant Brush.

**** Use Warning ****

Lubricant can not be cleaned with soap and water and is resistant to many solvents. 

Although the lubricant is chemically stable and non-hazardous please wear gloves and place a protective layer of drop-plastic below any working surface.  Spills are difficult to clean, and the lubricant will transfer from an operators hands to any surface they may touch. Avoid direct contact to skin.

Please clean up any accidents with a microfiber cloth.

Please note: this item is final sale. No returns or refunds will be accepted.

Stabilizer set includes one size 6.25U or 7U and four 2U pieces.

Gold-plated PCB mount stabilizers made by Durock.

• V2 features upgraded housing to prevent wire from popping out
• Transparent or Smokey coloured housing
• Nylon PA
• Gold-plated Steel Wire
• Gold-plated Screws
• Includes washers

* We recommend that you lubricate the stabilizers with Krytox 205g0 or Krytox XHT-BDZ  prior to use.

Please note: this item is final sale. No returns or refunds will be accepted.

Deskeys Switch Films uses a gasket material that compresses easily to fit in most MX switch housings. Using these films will vastly improve stem wobble, deepen the sound signature of a switch and provide a better typing experience. 

Specs:

• 120 films per pack
  
• Gasket/Foam material
• 0.3mm Thickness (compressible)
• MX Switch Compatibility

These high quality brushes are ideal for lubing your switches, springs, and stabilizers. Made with a smooth ergonomic wooden handle and sable bristles, these brushes will last many of lubing projects.

We recommend cleaning the brush after each use and having a separate brush for each type of lubricant to avoid mixing lubes.

Please note: this item is final sale. No returns or refunds will be accepted.

Switches are sold in packs of 10.

The Gateron Black Ink V2 is a premium linear switch that features a black translucent housing made from a new type of plastic. The spring inside is coated black, which helps reduce spring noise. These switches are very smooth and provide a nice sound with a little crunch on the spring.

Specs:

• Linear Switch
• 5-pin PCB Mount
• 60g Actuation
• 70g Bottom Out
• 4.0mm Travel

* Recommended to lubricate with Krytox 205G0 or TriboSys 3204

Please note: this item is final sale. No returns or refunds will be accepted.

KBDFans Switch Films is made of polycarbonate material that is 0.15mm thick. Using these will vastly improve stem wobble and provide a better typing experience.

Specs:

• 130 films per pack
  
• Polycarbonate material
• 0.15mm thickness
• Compatible with most switches, excluding low profile and box switches

Sleeve your cables with our selection of 550 Paracord to add some colour to your cable set up.

As you sleeve your cables, the paracord will stretch and you will require more paracord than the length of your cable. We recommend you add an extra foot of paracord for every 5 feet of cable purchased.

The price shown is per foot of paracord. Please add the desired length of paracord in the quantity. If you want two separate pieces of custom length paracord, please cart each item separately.

Please note: this item is final sale. No returns or refunds will be accepted.

This premium 2-in-1 switch opener by KBDFans x ai03 is milled from high-grade aluminum and can be used to open a variety of switches, including Cherry MX and Kailh style switches.

Specs:

• Designed by ai03
• Aluminum Top and Bottom
  
• Anodic Oxidation Process
  
• Magnetic Closure

Krytox GPL 105, is a industrial-grade PTFE oil. It is used to lubricate switch springs and switches to reduce spring ping. Krytox GPL 105 has less viscosity than Krytox GPL 106.

Our dropper bottles have a child-proof cap and require you to press down and twist to open.

Application can be done by brush, but for most efficiency, place a couple drops of oil into a small zip lock bag with your springs and shake. You will need to blow a little air into the bag before sealing to allow room for the springs to move around and spread the oil evenly. 

**** Use Warning ****

Lubricant can not be cleaned with soap and water and is resistant to many solvents. 

Although the lubricant is chemically stable and non-hazardous please wear gloves and place a protective layer of drop-plastic below any working surface.  Spills are difficult to clean, and the lubricant will transfer from an operators hands to any surface they may touch. Avoid direct contact to skin.

Please clean up any accidents with a microfiber cloth.

Please note: this item is final sale. No returns or refunds will be accepted.

Stabilizer set includes one size 6.25U or 7U and four 2U pieces.

Gold plated PCB mount stabilizers made by Durock.

• Transparent or Smokey coloured housing
• Nylon PA
• Gold-plated Steel Wire
• Gold-plated Screws

* We recommend that you lubricate the stabilizers with Krytox 205g0 or Krytox XHT-BDZ  prior to use.

Please note: this item is final sale. No returns or refunds will be accepted.

The price shown is per foot of Techflex. Please add the desired length of Techflex in the quantity. If you want two separate pieces of custom length Techflex, please cart each item separately. We recommend you add an extra foot of paracord for every 5 feet of cable purchased.

Please note: this item is final sale. No returns or refunds will be accepted.

TriboSys 3203, is a industrial-grade grease with a medium thickness. It is used to lube keyboard switches, reducing friction and providing a smoother experience when typing, without losing tactility.

We highly recommend using this lube on tactile-switches. Due to it's viscosity, we do not recommend using this on switch springs. 

5mL is enough to apply to approximately 450-500 switches. 

Our jars are child-proof and require you to press down on the lid, and twist to open.

Two disposable applicator brushes will be included with each order, but we recommend using a Premium Lubricant Brush.

**** Use Warning ****

Lubricant can not be cleaned with soap and water and is resistant to many solvents. 

Although the lubricant is chemically stable and non-hazardous please wear gloves and place a protective layer of drop-plastic below any working surface.  Spills are difficult to clean, and the lubricant will transfer from an operators hands to any surface they may touch. Avoid direct contact to skin.

Please clean up any accidents with a microfiber cloth.

Please note: this item is final sale. No returns or refunds will be accepted.

Colourful acrylic lube stations by KBDFans to simplify all your switch lubing projects. Note that these lube stations come with a protective plastic film that should be removed before use.

Specs:

• Acrylic
  
• Rubber feet included
  
• Dimensions 160mm x 160mm x 10.4mm
• Holds up to:
  
• 35 Switches
• 35 Springs
• 35 Stems

Each bundle includes three pieces of heatshrink that are 1.5" in length.

Heatshrink specs:

• 3/8" Diameter
• 3:1 Shrink Ratio

Switches are sold in packs of 10.

The Gateron Oil King is a linear switch that features a black nylon top housing, Ink bottom housing and POM stem. The spring inside is 20mm long.

Specs:

• Linear Switch
• 5-pin PCB Mount
• 55g Actuation
• 65g Bottom Out
• 4.0mm Travel
• 20mm Spring

* Recommended to lubricate with Krytox 205G0 or TriboSys 3204

Please note: this item is final sale. No returns or refunds will be accepted.

These are IN-STOCK units and ready to ship!

The KBDfans KBD67 Lite Mechanical Keyboard is a great entry level, hotswap 65% keyboard kit.

Specifications:

• ABS Plastic Case
• Polycarbonate (PC) Plate
• KBDfans PC Screw-In Stabilizers
   
• Wired Version
• Based on QMK Firmware
• VIA Support
• Support Per-Key RGB
• Kailh Hotswap sockets

Includes:

• KBD67 Lite ABS Plastic Case
  
• Polycarbonate (PC) Plate
• KBD67 PCB
• Wired RGB Hot-Swap PCB
• Accessories:
• Carrying Case
• KBDfans PC Screw-In Stabilizers
• KBDfans Stabilizer Foam Stickers
• Mute Silicone Internal Dampeners
• Coiled USB-C Cable
• Rubber Feet and Screws

Documentation:

• KBD67 Lite Installation Tutorial
• KBD67 Lite Acceptable Quality Standards

Krytox GPL 205 Grade 0, also referred to as 205g0, is a industrial-grade grease, thickened with PTFE. It is used to lube keyboard switches, giving them a very smooth feel when typing.

The syringes are prefilled with approximately 2.5mL of 205G0. They are used specifically for tuning your stabilizers. The needle and syringe will arrive disassembled and will need to be screwed in tightly to function. The needle tip is blunt and is thin enough to fit between the stabilizer wire and housing.

Here is a video on how to use the syringe to tune your stabilizers. 

**** Use Warning ****

Lubricant can not be cleaned with soap and water and is resistant to many solvents. 

Although the lubricant is chemically stable and non-hazardous please wear gloves and place a protective layer of drop-plastic below any working surface.  Spills are difficult to clean, and the lubricant will transfer from an operators hands to any surface they may touch. Avoid direct contact to skin.

Please clean up any accidents with a microfiber cloth.

Please note: this item is final sale. No returns or refunds will be accepted.

Switches are sold in packs of 10.

The Durock/JWK Linear is a linear switch that features either a transparent or smokey polycarbonate top housing, transparent or smokey polymer nylon bottom housing, and light blue POM stem. 

The transparent housing is a 62g variant.
The smokey housing is a 67g variant.

Specs:

• Linear Switch
• 5-pin PCB Mount
• 62g or 67g Bottom Out
• 4.0mm Travel Distance

* Recommended to lubricate with Krytox 205G0

Please note: this item is final sale. No returns or refunds will be accepted.

This USB 2.0 cable includes four internal cores: two 28 AWG power conductors and a 28 AWG twisted pair for data. Jacketed in a strong, yet flexible PVC material which allows for a long lasting, durable cable.

The price shown is per foot of USB Cable. Please add the desired length of USB Cable in the quantity. If you want two separate pieces of custom length USB Cable, please cart each item separately.

Please note: this item is final sale. No returns or refunds will be accepted.

Stabilizer set includes one size 6.25U, one 7U wire only and four 2U pieces.

Stainless Steel Plate Mount stabilizers made by Durock.

• Black or White coloured housing
• Nylon Polymer housing
• Stainless Steel Wire

* We recommend that you lubricate the stabilizers with Krytox 205g0 or Krytox XHT-BDZ  prior to use.

Please note: this item is final sale. No returns or refunds will be accepted.

KBDFans Spacebar Foam helps reduce the sound of pressing the spacebar. They are specifically cut for PCB mount stabilizers, if you are using plate mount stabilizers, you will need to modify them to make them fit. The adhesive on the back of the foam is quite strong, but can be used without applying the tape to the bottom of the spacebar.

• 3.5mm - Will fit Cherry, OEM & DSA profiles
• 6mm - XDA, MT3 & KAT profiles
• 9.5mm - SA & Hipro profiles

TriboSys 3204, is a industrial-grade grease with a medium-high thickness. It is used to lube keyboard switches, giving them a very smooth feel when typing, without losing tactility.

We highly recommend using this lube on tactile-switches, but can be used on linear-switches as well. Due to it's viscosity, we do not recommend using this on switch springs. 

5mL is enough to apply to approximately 450-500 switches. 

Our jars are child-proof and require you to press down on the lid, and twist to open.

Two disposable applicator brushes will be included with each order, but we recommend using a Premium Lubricant Brush.

**** Use Warning ****

Lubricant can not be cleaned with soap and water and is resistant to many solvents. 

Although the lubricant is chemically stable and non-hazardous please wear gloves and place a protective layer of drop-plastic below any working surface.  Spills are difficult to clean, and the lubricant will transfer from an operators hands to any surface they may touch. Avoid direct contact to skin.

Please clean up any accidents with a microfiber cloth.

Please note: this item is final sale. No returns or refunds will be accepted.