Miscellaneous

These high quality brushes are ideal for lubing your switches, springs, and stabilizers. Made with a smooth ergonomic wooden handle and sable bristles, these brushes will last many of lubing projects.

We recommend cleaning the brush after each use and having a separate brush for each type of lubricant to avoid mixing lubes.

Please note: this item is final sale. No returns or refunds will be accepted.

Stabilizer set includes one size 6.25U or 7U and four 2U pieces.

Gold-plated PCB mount stabilizers made by Durock.

• V2 features upgraded housing to prevent wire from popping out
• Transparent or Smokey coloured housing
• Nylon PA
• Gold-plated Steel Wire
• Gold-plated Screws
• Includes washers

* We recommend that you lubricate the stabilizers with Krytox 205g0 prior to use.

Please note: this item is final sale. No returns or refunds will be accepted.

KBDFans Switch Films is made of polycarbonate material that is 0.15mm thick. Using these will vastly improve stem wobble and provide a better typing experience.

Specs:

• 130 films per pack
  
• Polycarbonate material
• 0.15mm thickness
• Compatible with most switches, excluding low profile and box switches

Stabilizer set includes one size 6.25U or 7U and four 2U pieces.

Gold plated PCB mount stabilizers made by Durock.

• Transparent or Smokey coloured housing
• Nylon PA
• Gold-plated Steel Wire
• Gold-plated Screws

* We recommend that you lubricate the stabilizers with Krytox 205g0 prior to use.

Please note: this item is final sale. No returns or refunds will be accepted.

This premium 2-in-1 switch opener by KBDFans x ai03 is milled from high-grade aluminum and can be used to open a variety of switches, including Cherry MX and Kailh style switches.

Specs:

• Designed by ai03
• Aluminum Top and Bottom
  
• Anodic Oxidation Process
  
• Magnetic Closure

Deskeys Switch Films uses a gasket material that compresses easily to fit in most MX switch housings. Using these films will vastly improve stem wobble, deepen the sound signature of a switch and provide a better typing experience. 

Specs:

• 120 films per pack
  
• Gasket/Foam material
• 0.3mm Thickness (compressible)
• MX Switch Compatibility

Colourful acrylic lube stations by KBDFans to simplify all your switch lubing projects. Note that these lube stations come with a protective plastic film that should be removed before use.

Specs:

• Acrylic
  
• Rubber feet included
  
• Dimensions 160mm x 160mm x 10.4mm
• Holds up to:
  
• 35 Switches
• 35 Springs
• 35 Stems

The price shown is for 20 pieces of insulating fiber washers. Perfect to protect your PCB from your screw in stabilizers.

Specifications:

• 2 mm x 4mm x 0.3mm

Keycap pullers are made via CNC machining with anodized aluminum and steel wire, built to last.

Three piece detachable design with hidden tool to adjust imperfect keycap stems.

To remove keycaps, place wire around the keycap, slightly twist so the wires slide beneath the corners, and pull straight upwards. This keycap puller can fit 2-3 keys, before removing them from the wire.

* We do not recommend trying to expand wire around a full sized spacebar

Stabilizer set includes one size 6.25U, one 7U wire only and four 2U pieces.

Stainless Steel Plate Mount stabilizers made by Durock.

• Black or White coloured housing
• Nylon Polymer housing
• Stainless Steel Wire

* We recommend that you lubricate the stabilizers with Krytox 205g0 prior to use.

Please note: this item is final sale. No returns or refunds will be accepted.

The Gateron Switch Puller is an painless way to remove switches off your hotswap PCB or desoldered keyboard. These switch pullers are constructed with high-grade aluminum and features an MX-style release button, allowing you to put on your favorite keycap or artisan.

Do not use excessive force to avoid damaging the switches, plate or PCB. Mino Keys will not be held responsible for any damages due to improper use.

Keycap pullers made with plastic and steel wire.

To remove keycaps, place wire around the keycap, slightly twist so the wires slide beneath the corners, and pull straight upwards. This keycap puller can fit 2-3 keys, before removing them from the wire.

* We do not recommend trying to expand wire around a full sized spacebar

Springs are sold in packs of 100.

Gold-plated switch springs made by Durock. Selected weights are measured for bottom out force.

* We recommend that you lubricate the springs with Krytox 105 or Krytox 106 prior to use.

Please note: this item is final sale. No returns or refunds will be accepted.

Mino Key stickers come in a matte and holographic options.

Sticker bomb your water bottle, laptop or even your keyboard!

2.5" x 2.23" die cut vinyl stickers

The JTK Keycap Trays are a great way to safely and conveniently store your keycaps. These trays are made from a transparent polycarbonate material with a locking mechanism to ensure they stay in place.

Standard Tray Specs:

• Comes in a pack of two (2)
• Polycarbonate Plastic Material
• Stackable with respective size
  
• Compatible with Cherry, OEM, DCS, DSA, XDA and SA Row 3 only
• Dimensions (per tray): 280mm x 165mm x 16.5mm

Max Tray Specs:

• Comes in a pack of one (1)
  
• Polycarbonate Plastic Material
• Stackable with respective size
• Compatible with all keycap profiles
• Dimensions: 410mm x 250mm x 20mm

ePBT 9009 features a classic beige and white colourway with green and pink accents. The set was inspired by the Reuters keyboards made by Cherry in the mid 90's - early 2000's.

Specs:

• Manufactured by EnjoyPBT
• 178 keycaps
• Cherry Profile
  
• Dye-Sublimation
• MX Compatible
  

ePBT Black Japanese features a classic beige and white colourway with Japanese sublegends.

Specs:

• Manufactured by EnjoyPBT
• 148 keycaps
• Cherry Profile
  
• Dye-Sublimation
• MX Compatible